November 21, 2026

How to Propagate Monstera deliciosa from a Stem Cutting

By Tomas Rodak
Monstera deliciosa, propagation, stem cutting, TOMs FLOWer CLUB

A practical guide to nodes, aerial roots, water propagation, rooting substrate and new growth

Monstera deliciosa can be propagated from a stem cutting containing at least one healthy node and a viable axillary bud. The cutting can be rooted in water, perlite or a suitable well-draining substrate. An existing aerial root is helpful, but not essential.

The most important rule is simple: a Monstera leaf alone cannot produce a new plant. The stem node contains the growth point from which new roots and shoots can develop.

At TOMs FLOWer CLUB, I prefer propagation that gives the plant time to develop a healthy root system rather than encouraging fast but weak growth. Successful propagation is not simply about producing roots in a glass of water; it is about establishing a healthy young plant that can continue growing independently.

1. Understanding the Monstera node – the key to successful propagation

Before cutting your Monstera, it is important to understand the basic structure of its stem.

A node is the point on the main stem where a leaf and its petiole (leaf stalk) emerge. It contains or is associated with an axillary bud, a dormant growing point capable of developing into a new shoot.

The section of stem between two nodes is called an internode.

A Monstera stem cutting must include a viable node and growth bud to develop into a new plant.

Remember:

  • A leaf with its petiole but no stem node cannot produce a new Monstera.

  • A stem section with a viable node and axillary bud can produce new growth.

  • An existing aerial root is beneficial, but not a strict requirement.

Aerial roots are naturally produced by climbing Monstera plants. They help the plant attach to supporting structures and can develop into additional functional roots when they reach a suitable growing environment.

2. When is the best time to propagate Monstera deliciosa?

The most favourable period is generally spring and summer, when Monstera deliciosa is actively growing and light and temperature conditions support root development.

However, propagation is not restricted to a particular month. If your indoor environment provides sufficient warmth and light, stem cuttings can also be propagated during other seasons.

In autumn and winter, growth may slow considerably, particularly in cooler rooms or locations with limited daylight. Root development can therefore take longer.

For growers in Switzerland and Central Europe, I generally recommend taking cuttings during the brighter months whenever possible.

3. What you need to propagate Monstera deliciosa

Monstera Deliciosa, rare houseplant with mature split leaves, organically grown Swiss Cheese Plant in pot in TOMs FLOWer CLUB, perfect for indoor jungle decor.

The process requires only a few basic items:

  • A healthy Monstera deliciosa mother plant

  • A clean, sharp knife or pruning scissors

  • A suitable glass or container for water propagation, or a small pot with drainage

  • Clean water

  • Perlite or a suitable airy rooting substrate

  • A support or stake if the cutting is top-heavy

Rooting hormone is optional. Monstera deliciosa can develop roots without additional rooting hormones.

4. Step-by-step: How to take a Monstera stem cutting

Step 1 – Select a healthy stem

Choose a healthy section of the main stem with at least one clearly identifiable node and a viable axillary bud.

Ideally, select a section that also has:

  • One or more healthy leaves

  • An existing aerial root

  • Firm, undamaged stem tissue

A healthy leaf continues to photosynthesise and supports the cutting while new roots develop.

Do not select a leaf simply because it looks attractive. First identify the node and make sure that the cutting includes the actual stem.

Step 2 – Make a clean cut

Use a sharp, clean cutting tool to make a precise cut through the stem below the selected node.

Leave a small section of stem below the node so that it can be positioned securely in the rooting medium.

If an aerial root is already present, keep it attached.

For longer stems, it is possible to prepare several individual cuttings. Each section must contain at least one viable node and its associated growth point.

Never cut through the node or damage the axillary bud.

Step 3 – Choose your rooting method

There are three practical methods for propagating Monstera deliciosa from stem cuttings.

Method A – Water propagation

Water propagation is a straightforward method, particularly for beginners, because you can observe the development of new roots.

  1. Place the cutting in a clean glass or container.

  2. Position the node and the base of the cutting in water.

  3. Keep the leaf and petiole above the water.

  4. Place the container in a warm location with bright, indirect light.

  5. Replace the water when it becomes cloudy and keep the container clean.

Avoid submerging the entire cutting. The aim is to provide moisture to the node without creating conditions that encourage stem rot.

One advantage of water propagation is that root development is visible. However, roots formed in water may differ from those developed in a solid rooting medium. Take care when transferring the cutting into substrate.

Method B – Propagation in perlite

Perlite is a lightweight mineral rooting medium that provides a combination of moisture retention and aeration.

monstera deliciosa, cutting, propagation guidy, learning with TOMs FLOWer CLUB

It is particularly useful for Monstera cuttings because developing roots need both moisture and oxygen.

  1. Moisten the perlite lightly.

  2. Position the node in contact with the medium.

  3. Support the cutting so that it remains stable.

  4. Keep the perlite lightly moist, never permanently waterlogged.

  5. Place the container somewhere warm with bright, indirect light.

Check the moisture regularly. Perlite should not be allowed to dry out completely during initial root development, but stagnant water should be avoided.

Method C – Direct propagation in substrate

Monstera deliciosa can also be rooted directly in a suitable, airy and well-draining substrate.

Use a relatively small pot with drainage holes. A container that is unnecessarily large can retain too much moisture around a small cutting.

Position the node in the substrate while keeping the leaf and growing tip above the surface.

Keep the substrate lightly moist during initial establishment. Avoid excessive watering, as insufficient aeration and permanently wet conditions can cause the cutting to rot.

This method has the advantage that the cutting develops its roots directly in the type of environment in which it will continue growing.

5. The right conditions for successful root development

Once the cutting is prepared, the most important factors are warmth, light, moisture and patience.

Monstera deliciosa, stem cutting, propagation, plant care guide by TOMs FLOWer CLUB

Light: Provide bright, indirect light. Avoid strong direct sunlight, particularly during the initial rooting period.

Temperature: Warm, stable conditions encourage root development. Avoid cold windowsills, draughts and sudden temperature fluctuations.

Moisture: Keep the rooting medium appropriately moist, but never saturated. Oxygen around the developing roots is essential.

Humidity: Moderate to higher humidity can help reduce excessive water loss from the leaves. However, high humidity cannot compensate for poor aeration or waterlogged substrate.

Stability: Support larger cuttings so that the developing roots are not repeatedly disturbed by movement.

6. How long does it take for a Monstera cutting to root?

Root development depends on the maturity of the cutting, the presence of aerial roots, temperature, light and the chosen propagation method.

Under favourable conditions, initial roots may appear within a few weeks. However, the development of a new shoot and leaf can take considerably longer.

The University of Minnesota Extension notes that Monstera nodes may take two to three months to produce new leaves.

It is important to distinguish between root development and new leaf growth. A cutting may already have a healthy root system while its axillary bud remains dormant.

Do not discard a firm, healthy cutting simply because it has not produced a new leaf yet.

7. When should you transfer a rooted cutting into a pot?

If you have propagated your Monstera in water or perlite, wait until a healthy root system has developed before transferring it into its permanent growing substrate.

Look for several established, firm roots rather than just one short root emerging from the node.

Choose a relatively small pot with good drainage and an airy substrate suitable for aroids.

Position the cutting securely and avoid damaging the new roots during planting.

After transplanting, water carefully and allow excess water to drain. During the following weeks, monitor the substrate and adjust watering to the plant's developing root system.

Do not immediately place a small cutting into an oversized pot. A pot that is too large can make moisture management more difficult.

8. Common Monstera propagation problems

Why is my Monstera cutting not producing roots?

Possible reasons include insufficient warmth, poor light, a damaged node, excessive moisture or a cutting that does not contain a viable node.

Check the condition of the stem and rooting medium. A healthy cutting should remain firm rather than becoming soft or mushy.

Can I propagate Monstera deliciosa from a leaf without a node?

No. A detached leaf and petiole without a stem node and viable growth bud cannot develop into a complete new Monstera plant.

The leaf may remain green for some time, but it will not produce a new growing shoot.

Why is my Monstera cutting turning black or becoming soft?

This is often associated with excessive moisture, poor aeration or tissue deterioration.

Remove the cutting from its rooting medium and inspect the affected area. If the stem has become soft or rotten, the cutting may no longer be viable.

Does a Monstera cutting need an aerial root?

No. An aerial root is helpful but not essential. The essential part is a viable node containing an axillary bud.

Can I propagate Monstera deliciosa in winter?

Yes, provided that sufficient warmth and light are available. However, root and shoot development may be slower during the darker months.

9. What happens after propagation? Helping your new Monstera grow

Once established, Monstera deliciosa develops into a climbing plant.

In its natural habitat, it uses aerial roots to attach itself to trees and other supporting structures. If you want to encourage strong vertical growth and the development of larger, mature leaves with characteristic fenestrations, provide a suitable climbing support.

A moss pole, coir pole or another stable structure can help guide its growth.

Give the plant sufficient indirect light, a well-draining substrate and appropriate watering. Allow the upper part of the substrate to dry to a suitable degree before watering again.

With time, a small stem cutting can develop into a substantial tropical houseplant.

Large Monstera Deliciosa houseplant with mature split leaves, organically grown Swiss Cheese Plant in pot in TOMs FLOWer CLUB, perfect for indoor jungle decor.

Final thoughts from TOMs FLOWer CLUB

Propagating Monstera deliciosa is a rewarding way to create a new plant from an established mother plant.

The technique itself is not complicated. The real difference lies in understanding the plant's structure, selecting the right node and providing suitable conditions for root development.

At TOMs FLOWer CLUB, I believe that successful propagation is not about speed or quantity. It is about understanding how plants grow and giving them the conditions they need to develop naturally.

A little patience at the beginning can make all the difference to the quality of the plant you grow.

 

 


Frequently Asked Questions – Monstera deliciosa propagation

What is the easiest way to propagate Monstera deliciosa?

The easiest methods are water propagation and rooting in perlite. Both allow a stem cutting containing a viable node to develop roots. Water propagation has the advantage that root development can be observed directly.

Can Monstera deliciosa grow from a single leaf?

No. A leaf without a stem node and viable axillary bud cannot produce a new growing shoot. A viable stem cutting must include a node.

How many nodes does a Monstera cutting need?

At least one viable node with an axillary bud is required. Cuttings with more than one node can also be propagated, provided each section is handled appropriately.

Do Monstera cuttings need aerial roots?

No. Aerial roots are helpful, but not essential. A viable node and axillary bud are the critical requirements.

How long does Monstera propagation take?

Initial roots may develop within a few weeks under favourable conditions. New leaves can take considerably longer, sometimes two to three months or more.

Can I root a Monstera cutting directly in soil?

Yes. A stem cutting can be rooted directly in an airy, well-draining substrate. Keep the node lightly moist and avoid waterlogging.

What is the best temperature for Monstera propagation?

Warm, stable indoor conditions are preferable. Avoid cold locations and sudden temperature changes. Consistent warmth, bright indirect light and appropriate moisture are more important than following a rigid temperature target.

Can I propagate a variegated Monstera deliciosa from a cutting?

Yes, provided the cutting contains a viable node and growth bud. Vegetative propagation can preserve the characteristics of the parent plant, but the amount and distribution of variegation in new growth can vary. A cutting from an entirely white section may struggle because it has very little chlorophyll available for photosynthesis.